HP Compaq nc6000 - Notebook PC Hardware Manual page 98

The memory capacity of the notebook can be upgraded by adding
a memory module to the expansion slot or by upgrading the
existing memory module in the primary memory slot.
To add or upgrade a memory module:
1. Shut down the notebook. (If you are not sure whether the
notebook is off or in Hibernation, turn the notebook on by
pressing the power button. Then shut down the notebook
through the operating system.)
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove any battery packs from the notebook.
5. Remove the 2 keyboard access screws from the bottom of the
notebook. A keyboard icon is located next to both keyboard
access screws.
Hardware Guide
Hardware Upgrades
8–7