Removing An Optical Disc (No Power) - HP Compaq nc6000 - Notebook PC Hardware Manual

Removing an Optical Disc (No Power)

If power is unavailable:
1. Insert the end of a paper clip 1 into the release access in the
front bezel of the drive.
2. Press gently on the paper clip until the media tray is released,
then pull out the tray 2 until it is fully extended.
3. Remove the disc 3 from the tray by gently pushing down on
the spindle while lifting the outer edges of the disc. Handle
the disc by the edges, not the flat surfaces. If the media tray is
not fully extended, tilt the disc as you remove it. To protect
the disc, place it in a protective case.
4. Close the media tray.
Hardware Guide
Drives
4–15