Enabling Usb Legacy Support - HP Compaq nc6000 - Notebook PC Hardware Manual

External Devices

Enabling USB Legacy Support

You must enable USB legacy support to:
■
Use a USB keyboard, mouse, or hub connected to a
USB connector on the notebook during startup or in
a non-Windows application or utility.
■
Boot from an optional external MultiBay.
To enable USB legacy support:
1. Turn on or restart the notebook.
2. Press
displayed in the lower left corner of the screen.
❏
❏
3. Select Advanced menu > Device Options.
4. Select Enable USB legacy support.
5. To save your preference and exit Computer Setup, select
File > Save Changes and Exit, then follow the instructions
on the screen.
7–4
while the F10 = ROM Based Setup message is
f10
To change the language, press
For navigation instructions, press
f2.
f1.
Hardware Guide