Memory Module; Rom Module - Epson ColorPage EPL-C8000 User Manual

Memory Module

Your printer has 64 MB memory as default. You can increase this
printer memory up to 256 MB by installing optional DIMMs (Dual
In-line Memory Module).
This printer has two slots for optional DIMMs. To install DIMMs,
see Setup Guide .
You can purchase DIMMs from many vendors. Make sure that
the DIMM you purchase meets the following requirements:
DRAM type
Capacity
Type
Access speed
Height
Note:
The total printer memory is the default 64 MB plus all installed DIMM.
For example, if you install a 32MB DIMM, the total printer memory is
96 MB.
However, if you install two 128MB DIMMs, the total available printer
memory is 256 MB though the installed memory is more than 256 MB.

ROM Module

In some locations, there are optional ROM modules that can
expand your printer's features.
To install a ROM module, see Setup Guide .
6-4
Using Options
Synchronous Dynamic RAM Double In-line
Memory Module (SD RAM DIMM)
32MB, 64MB, or 128MB
168-pin type, 64 bit, with SPD
66.66 MHz or higher (15 ns or less)
Less than 40 mm