How to select an output tray
There are two ways to specify which output tray you want to use,
the face-down tray or the face-up tray:
Using the printer driver:
Click the Basic Settings tab and select either the FaceDown Tray
or the FaceUp Tray check box. Then click OK.
Using SelecType mode with the control panel:
Select
(face-down tray) or
setting.
Loading Paper
This section describes how to load paper in the MP tray and paper
cassettes. If you use special media such as EPSON Color Laser
Transparencies or envelopes, also see the section "Printing on
Special Paper" later in this chapter.
Loading in MP tray
1. Adjust the expansion tray extensions to fit the size of the
media you want to load.
3-12
Paper Handling
(face-up tray) as the Out Bin