Lj4 Menu - Epson EPL-N1200 User Manual

LJ4 Menu

The LJ4 menu settings control the available fonts and symbol
sets when you use the LJ4 (PCL5e) emulation mode. You
should change the font and symbol sets using your software,
not using SelecType, because your software settings override
SelecType settings.
LJ4 menu items
Menu item
FontSource
Font Number
Pitch
Height
SymSet *
Form
Source SymSet **
Dest SymSet **
* If the font selected in the FontSource and Font Number settings is not
available in the SymSet you choose, the FontSource and Font Number
settings return to their default values.
** These menu items are available only when an optional font ROM module is
installed.
Description
Selects the default font source to Resident, SIMM, or
Download
Sets the default font number for the selected font
source, 0 through 65535
Specifies the font pitch if the default font is scalable
and fixed-pitch, from 0.44 to 99.99 cpi (characters
per inch) in 0.01 cpi increments; 10.00 is the default
Specifies the font height if the default font is
scalable and proportional, from 4.0 to 999.75 points
in 0.25 point increments
Selects the symbol set to be used by the default
font; Roman-8 is the default (see the Technical
Information manual for details on the available
symbol sets)
Sets the number of lines (5 to 128) for the selected
paper size and orientation, causing new line
spacing settings to be stored in the printer; changes
to the Page Size or Orientation settings in SelecType
may change the Form setting you select; 64 lines is
the default
Selects the symbol set number for an optional font
ROM source (from 0 to 3199)
Selects the symbol set number for an optional font
ROM destination (from 0 to 3199)
Using the Control Panel
3-17