Parallel B and Parallel C Menus
These menus control interface options when you use the
Parallel B and/or Parallel C interfaces.
Parallel B and Parallel C menu items
Menu item
Speed
Bi-D *
Buffer Size
*
Available only on the Parallel B menu.
Serial Menu
The Serial menu is available only when you have installed the
optional LocalTalk/Serial module or the Serial interface card
(described in Chapter 4) and have set the Emulation menu to
Serial (see page 3-10). You may need to change these settings to
match the serial settings used by your computer.
Note:
You can also change these settings using the Remote Control Panel
utility as described in the Technical Information manual. To match
the computer's baud rate or set a higher one than that supported by
your computer, see the Technical Information manual (this may not
work with some computers).
Description
Selects the transfer speed through the interface channel
based on either the STROBE (Fast) or ACKNLG (Normal)
signal delay period
Enables or disables bidirectional communication across
the interface channel
Sets the memory allocation used for the printer's parallel
interfaces: Maximum (more for receiving data), Minimum
(more for printing data), or Normal (balanced usage)
Using the Control Panel
3-15