Replacing The Imaging Cartridge - Epson EPL-N1200 User Manual

Replacing the Imaging Cartridge

Your printer's imaging cartridge can print up to 6,000 pages,
depending on how complex your print jobs are. There are
several ways to tell when you need to replace a cartridge:
You see a Toner Low message on the control panel display
You see a Toner Out message on the display
You notice that printing is faint and the Toner function in
SelecType tells you that you have 0 to 25% toner capacity.
If you see a toner message on the control panel display, replace
the cartridge right away.
To check the toner capacity using SelecType, access the Setup
menu and select Toner as described in Chapter 3. If there is
only one asterisk on the display, you have 25% or less of toner
left and must replace the cartridge. If you have more left, there
may be another reason your printing is faint; see Chapter 6 for
solutions.
Be sure to install EPSON imaging cartridge #S051016 even if
the cartridge you are removing has another part number.
Follow these steps to replace the imaging cartridge:
1. Make sure the printer is turned on.
2. Open the printer's top cover.
3. Grasp the old imaging cartridge and pull it straight out of
the printer.
Warning:
w
Do not touch the fuser inside the printer; it is marked with
the label CAUTION HOT SURFACE.
4. Dispose of the used imaging cartridge with non-burnable
trash.
5-2
Maintenance