Installing An Interface Card - Epson EPL-5700 Reference Manual

The twinax interface is compatible with the following IBM
systems: AS-400, System 36, 5251 (model 12), System 34, System
38, and 5294. When equipped with the EPSON twinax interface,
the printer can be used in place of the following IBM system
printers: 4210, 5224 (models 1 and 2), 5256 (models 1, 2, and 3),
3218 (non IPDS), 4214 (model 2), 5225 (models 1, 2, 3, and 4),
and 5219 D01, D02.
The coax interface allows the printer to be connected to the
following IBM control units and mainframe systems: 3174,
3276, 4274, and 3270.
To add a direct connection to a Macintosh computer with the
optional EPSONScript Level 2 Package, use the AppleTalk
Interface Card (C82312
Note:
If you reset the printer while it is receiving data through the
AppleTalk Interface Card, you need to turn the printer off and then on
again before it can communicate properly.
To add a direct connection to your GPIB network, use the GPIB
Interface Card (C82313

Installing an Interface Card

Follow the steps below to install an optional interface card.
1. Turn off the printer.
2. Unplug the power cable from the electrical outlet.
3. Turn the printer so its back faces you.
]
).
]
).
3-15
Options