Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-XU105 Owner's Manual

Video Input

Input Source Selection (Video, S-video)

Direct Operation
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Press the Point
frame pointer to the Input Menu icon.
2 Press the Point
pointer to Video and then press the SELECT button to
display the Source Select Menu .
3 Move the pointer to the desired source and then press
the SELECT button.
When selecting Auto, the projector automatically
Auto
detects incoming video signal, and adjusts
itself to optimize its performance. The projector
selects connection in the following order:
1. S-video
2. Video
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the
S-video
S-VIDEO jack, select S-Video.

Note:
• When the Input Search function is set to "On1" or "On2",
the input signal will be searched automatically (p.47).
36
◄►
buttons to move the red
▲▼
buttons to move the red arrow
Top Control
INPUT button
REMOTE CONTROL
VIDEO button
Input Menu icon
Input Menu
M o v e t h e p o i n t e r t o
Vi d e o a n d p r e s s t h e
SELECT button.
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the
source that you want
to select and press the
SELECT button.
Computer 1
Computer 
VIDEO