Sanyo PLC-XU105 Owner's Manual page 41

Sharpness
◄
Press the Point button to decrease the sharpness of the
►
image; press the Point
of the image (from 0 to 15).
Gamma
◄►
Use the Point buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off .......... Disabled.
L1 .......... Lower reduction
L2 .......... Higher reduction
Progressive
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off .......... Disabled.
L1 .......... For an active picture.
L2 .......... For a still picture.
Film ........ For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an "Image (1–4)" in the
Image Select Menu on page 39.
Quit
Exit the Image Adjust Menu.

Notes:
• Noise reduction and Progressive cannot be selected when
480p, 575p, 720p, 1035i, or 1080i is selected (p.38).
• Reset and Store icons will be displayed when any adjustment
is made.
button to increase the sharpness
▲▼
buttons to select one
Video Input
Image Mode Menu
Move the red frame
pointer to an image
item to be set and
t h e n p r e s s
SELECT button.
Store icon
A confirmation box
appears and then
select [Yes].
t h e
41