Brother PE-DESIGN PLUS Operation Manual page 18

Creating Embroidery Patterns
5.
Move the pointer over the rotation handle (1),
and then, while holding down the left mouse
button, drag the mouse to adjust the angle of
the pattern.
a
Note:
When imported stitch patterns are enlarged
or reduced, the embroidering quality may be
reduced.
c
"Slightly Enlarging/Reducing
Stitch Patterns" on page 38.
16
Step 6
You can sew a pattern transferred to your sewing
machine by writing it to media.
1
There are many methods to transfer data; however,
the procedures for two of these methods are
described below.
• Writing to an original card (☞p. 16)
Data can be transferred to embroidery machines
compatible with original cards.
• Transferring data to embroidery machines via a
USB media (☞p. 17)
Data can be transferred to embroidery machines
equipped with a USB-B connector.
■
Transferring the design to an
original card
1.
Insert an original card into the USB Card
Writer Module.
2.
Click
then
Transferring embroidery patterns
to embroidery machines
, then ,
.