Installation - Sony XM-752EQX Operating Instructions Manual

Installation
Before Installation
• Mount the unit either inside the trunk or under a
seat.
• Choose the mounting location carefully so that
the unit will not interfere with the normal
movements of the driver, and where it will not
be exposed to direct sunlight or hot air from the
heater,
• Do not install the unit under the floor carpet,
where heat dissipation from the unit would be
considerably impaired.
First, place the unit where you plan to install it,
and mark the positions of the four screw holes on
the surface of the mounting board (not supplied).
Then drill the holes approximately 3 millimeters
(mm) in diameter and mount the unit onto the
board with the supplied mounting screws. The
supplied mounting screws are 15 mm long.
Therefore, make sure that the mounting board is
thicker than 15 mm.
Unit :mm(in.)
55
e 6 ¢/,)
/--
I' "t -----z
220 18a/4l
11