Download Print this page

Sony XM-752EQX Marketing Specifications Specifications

2/1 channel amplifier/eq
Hide thumbs

Advertisement

2000 MOBILE PRODUCT GUIDE – PART 2
• 75 W x 2 Ch at 0.04% THD (4 ohms)
• 100 W x 2 Ch at 0.1% THD (2 ohms)
• 200 W x 1 at 0.1% THD (4 ohms)
• RCA and Speaker Level Inputs, RCA Output
• Regulated MOSFET Power Supply
Specifications
Circuit System
Inputs
Outputs
Speaker Impedance
Rated Outputs
(at 14.4 VDC)
Maximum Output
Equalizer
Frequency Response
Harmonic Distortion
Input Level Adjustment Range
High-Pass Filter
Low-Pass Filter
Power Requirements
Power Supply Voltage
Current Drain
Dimensions (w/h/d)
Weight
Supplied Accessories
18
XM-752EQX
2/1 Channel Amplifier/EQ
OTL (output transformerless) Circuit
Pulse Power Supply
RCA Pin Jacks
High Level Input Connector
Speaker Terminals – through out pin jacks
2-8 ohms (stereo)
4-8 ohms (when used as bridging amplifier)
75 W x 2 (20-20 kHz, 0.04% THD, at 4 Ω )
100 W x 2 (20-20 kHz, 0.1% THD, at 2 Ω )
200 W x 1 (20-20 kHz, 0.1% THD, at 4 Ω )
150 W x 2 (at 4 Ω)
400 W x 1 (at 4 Ω)
50 Hz, 200 Hz, 800 Hz, 3.2 kHz, 12.8 kHz ± 12 dB
5-100 Hz (+0/-3 dB)
0.005% or less (at 1 kHz, 4 Ω)
0.2-4.0 V (RCA pin jack)
0.4-8.0 V (high level input)
50-200 Hz, -12 dB/oct
50-200 Hz, -12 dB/oct
12 V DC Car Battery (negative ground)
10.5-16 V
At Rated Output: 20 A
Remote Input: 1.5 mA
Approx. 282 x 55 x 220 mm (11
Approx. 2.2 kg (4 lb. 14 oz.) (not including accessories)
Mounting Screws (4); Terminal Cap (1)
Design and specifications subject to change without notice.
• 5 Band +/-12 dB Adjustable EQ
• 50/200/800/3.2k/12.8 kHz Frequency Centers
• Variable 50-200 Hz Hi-Pass/Lo-Pass Filter
• Recessed Controls w/Level LEDs
• Heavy-Duty Connectors
1
/
x 2
1
/
x 8
3
/
in.) (not incl. projecting parts and controls)
8
4
4

Advertisement

loading

  Also See for Sony XM-752EQX Marketing Specifications

  Related Manuals for Sony XM-752EQX Marketing Specifications

  Summary of Contents for Sony XM-752EQX Marketing Specifications

  • Page 1 2000 MOBILE PRODUCT GUIDE – PART 2 • 75 W x 2 Ch at 0.04% THD (4 ohms) • 100 W x 2 Ch at 0.1% THD (2 ohms) • 200 W x 1 at 0.1% THD (4 ohms) • RCA and Speaker Level Inputs, RCA Output •...
  • Page 2 2000 MOBILE PRODUCT GUIDE – PART 2 XM-752EQX 2/1 Channel Amplifier...