Table of Contents
Advertisement
Additional Information
Installing the accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by
Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this product.
Your TV can be installed using the Wall-Mount Bracket SU-WL50B (for KLV-42EX410/KLV-32EX310) or SU-
WL100 (for KLV-22EX310) (sold separately).
• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.
• Refer to "Detaching the stand from the TV" (page 7).
SU-WL50B:
(KLV-42EX410/KLV-32EX310)
Mounting Hook
Soft cloth
When installing the base bracket on the wall (for SU-WL50B):
1
Install one side of each plate to the upper bracket and the other side to the lower bracket.
2
Attach the base bracket to the wall.
3
Remove the plates (KLV-32EX310 only).
• Be sure to store the plates in a safe place after use.
Screw
(+PSW 6 × 16)
SU-WL100:
(KLV-22EX310)
Mounting Hook
• Place the TV on the stand, when securing the
Mounting Hook.
Screw
(+PSW 4 × 12)
Continued
33
GB
Advertisement
Table of Contents
