Dynamic Bass Response System Connection (Subwoofer) - Sony WEGA KV-27FA210 Operating Instructions Manual

Operating Instructions
Dynamic Bass System Connection (Subwoofer)
' Make sure to disconnect the TV before connecting the Dynamic Bass ResponseSystem:
• Only the SupPlied Dynamic Bass Response System unit should be connected to the KV-
27FA210 Sony TV inputs (SUBWOOFER+k).
1
Introduce the support pin of the Dynamic Bass Response System into the guide located on
top of the TV.
Pin
Dynamic Bass Response System
Guide
2 Connect the Dynamic Bass Response System cables to the indicated inputs of the TV rear
panel. Connect the gray cable to the SUBWOOFER ,:_+ (gray input). Connect the black
cable to the SUBWOOFER _- (black input). See illustration below.
Subwoofer +
3 Once installation is complete, plug the TV's AC power cord into the wall socket.
X,_D0 not plug in the AC P0wer cord until the Subw00fer is COmpletely installed.
12