Dynamic Bass Response System Connection (Subwoofer) - Sony KV-27FA210 Instructions: TV stand (primary manual) Operating Instructions Manual

Operating Instructions
Dynamic Bass System Connection (Subwoofer)
• Make sure to disconnect the TV before connecting the Dynamic Bass Response System.
• Only the supplied Dynamic Bass Response System unit should be connected to the KV-
27FA210 Sony TV inputs (SUBWOOFER +/-).
1
Introduce the support pin of the Dynamic Bass Response System into the guide located on
top of the TV.
Pin
2
Connect the Dynamic Bass Response System cables to the indicated inputs of the TV rear
panel. Connect the gray cable to the SUBWOOFER
cable to the SUBWOOFER
Subwoofer + (gray)
3
Once installation is complete, plug the TV's AC power cord into the wall socket.
✍
Do not plug in the AC power cord until the subwoofer is completely installed.
12
(black input). See illustration below.
1 3 4 5 AUDIO OUT
(VAR/FIX)
Y
S VIDEO
Licensed by BBE Sound, Inc.
under USP4638258, 4482866.
P
B BBE and the BBE symbol are
trademarks of BBE Sound, Inc.
P
R
VIDEO
L L
(MONO) (MONO)
R R
Dynamic Bass Response System
Guide
(gray input). Connect the black
Subwoofer - (black)