Table of Contents
Advertisement
Connecting Your TV
TV, VCR, and Cable Box
SVBDEO
AUD,OR AUDIOL VIDE®
From
cable
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied)
from the OUT jack on your cable box to the IN jack
on your VCR.
3
Connect a coaxial cable (not supplied)
from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
4
If your VCR is equipped
with video outputs,
you can get better picture quality by
connecting
audio/video
cables (not supplied)
from AUDIO/VIDEO
OUT on your VCR to
AUDIO/VIDEO
IN on your TV.
Optional connection
_1 For better picture quality, use S VIDEO inserted
of the yellow video cable. S VIDEO does
not provide
sound, so you still must connect the audio cables.
Using your TV with this connection
Program
your Sony remote control to operate
your VCR or cable box (see page 5).
VCR_DVD
_1 To activate your remote, press
CED to operate
your VCR or _"°_:CED
to operate your cable
box. To do this, first program
your remote control, then use the Channel Fix feature to set
your TV to channel
3 or 4 (see page 29).
Press _
repeatedly
to switch between
VCR input (VIDEO input), VHF/UHF
(local
channels
or unscrambled),
or cable box (cable system or scrambled
channels).
15
Advertisement
Table of Contents
