How To Use P&P And Pip Features; To Display A Picture In The Sub Window; To Change Channels In The Sub Window; To Exit From P&P And Pip - Sony BRAVlA KDL-32XBR4 Operating Instructions Manual

How to Use P&P and PIP Features
This TV comes with the P&P and PIP features
which allow you to view two pictures
simultaneously. P&P (picture and picture)
provides two windows side by side. PIP (picture in
picture) provides PC input signal and TV
channels.
• The VHF/UHF/CABLE input must be connected to
use the P&P/PIP feature.
• These features are not available when the Parental
Lock settings are set to block programs by ratings. If
channel blocking is set, these features can be used.
• Closed Captions (CC) is not available in these
features.
P&P
Main Window o
Press CH +/- to change the channels o1 enter the
channel number using tile 0-9 numeric buttons.
1
Presstlle OPTIONS.
2
Press @ while Exit P&P o1"Exit PIP
5"
(depends on the mode your are in) is
highlighted.
• You may also press RETURN while in this feature to
exit.
• Additional compatible device with television tuner
required to watch two sinmltaneous live television
programs.
PIP
Main Window
(PC)
Sub Window
(Location of
the Sub
Window can
moved by
pressing
4"/'!"/*/*.)
1
While watching one of the following inputs:
Component,
HDMI or
PC;
press OPTIONS
to
display
the OPTIONS menu.
• The input you are watching will become the Main
Window.
2
Press 4,/,!,to highlight the P&P or PIP and
press @ to display the TV channels in the
Sub Window.
• To swap audio in P&P mode, use the <4* button to
swap the audio between the Main Window and Sub
Window.
• To swap audio in PIP mode, press OPTIONS, then
press 4,/11. to highlight Audio Swap.
Component 1
Component 2
HDMI IN 1 (except PC timing)
HDMI IN 2 (except PC timing)
HDMI IN 3 (except PC timing)
TV Channel
(VHF/UHF/
CABLE IN)
PC
HDMI IN 1 (PC timing) TV Channel
(VHF/UHF/
HDMI IN 2 (PC timing) CABLE IN)
HDMI IN 3 (PC timing)
• Compatible PC Timings can be found on page 18.
27