Sony BRAVlA KDL-32XBR4 Operating Instructions Manual page 15

[] HDMI IN 1
HDMI
[] HDMI IN 3
HDMI/
R-AUDIO-L
HDMI (High-Definition Multimedia Interfuce) provktes an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video equipment,
such as a set-top box, DVD player, Blu-ray Disc player. A/V receiver as well as PC.
HDMI supports enhanced, or high-definition video, plus digital audio.
If the equipment has a DVI jack and not an HDMI jack, connect the DVI .jack to the
HDMI IN 3 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the
AUDIO IN (L/R) jacks of HDMI IN 3.
Q
DVI-to-HDMI cable
[] PC IN
(RGB/AUDIO)
[] VIDEO IN 1
S VIDEO
@_,_ Audio cable
O
DVl-to-HDMI adapter
• HDMI connection is necessary to view 480i, 480p, 720p, 1080i and 1080p formats. Note
that this TV displays all video input signals in a resolution of 1,366 clots x 768 lines.
• Be sure to use only an HDMI cable that bears the HDMI logo.
Connects to a personal computer's video output connector using HDI5-HDI 5 cable
(analog RGB). Can also be connected to other analog RGB equipment.
See "PC Input Signal Reference Chart" on page 18 Ibr the signals that can be displayed.
• For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If this is the case, connect the adapter to the computer before connecting the
HDI5-HDI5 cable.
• If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen
settings on page 33.
Connects to the S VIDEO output jack of your VCR or other video equipment that has
S VIDEO. The S VIDEO provides better picture quality than composite video ([_]). (See
Auto S Video on page 39.)
[] VIDEO IN 1/3
VIDEO/
L(MONO)-
AUDIO-R
Connects to the composite video and audio output.jacks on your A/V equipment such as
a VCR or other video equipment. A third composite video and audio (VIDEO 2 IN) is
located on the left side of the TV.
[] COMPONENT IN
112 (1080p/1080i/
720p1480p1480i)l
L-AUDIO-R
[] AUDIO OUT
(VAR/FIX)
[] DIGITAL OUT
(OPTICAL)
[] AC IN
[] DMeX/SERVICE
[] VHF/UHF/CABLE
Connects to your TV's component video (YPBPR) and audio (L/R)jacks. Component
video provides better picture quality than the S VIDEO ([]) or the composite video ([])
connections.
• Component video (YPI3PI0 connection is necessary to view 480i, 480p, 720p, 1080i and
1080p formats. Note that this TV displays all video input signals in a resolution of
1,366 clots x 768 lines.
Connects to the left and right audio input .jacks of your analog audio equipment. You can
use these outputs to listen to your TV's audio through your stereo system.
Connects to the optical audio input of your digital audio equipment that is PCM/Dolby
Digital compatible.
Connects the supplied AC power cord.
This USB port is for service only unless you are connecting the optional BRAVIA
external module (DMeX).
RF input that connects to your Cable or VHF/UHF antenna.
h3
g.
15