Sony STR-DG510 Operating Instructions Manual page 20

The image from a video component connected
to this receiver can be displayed on a TV
screen.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Note
Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on. neither vide() nor audio signals will be
transmitted.
Tips
• You c:m watch the selected input image when you
connect the MONITOR OUT or HDMI OUT jack
to a TV or pr_iector.
• To output the sound of the TV from the speakers
conuected to the receiver, be s/ire to:
connect the audio output jacks of the TV to the
TV AUDIO IN jacks of the receiver.
turn off or mute the TV's volume.
TV
Audio signals Video signals
0
OAudio cord (not supplied)
OVideo cord (not supplied)
I_ Component video cord (not supplied)
20G8