Sony STR-DG510 Operating Instructions Manual page 8

Name Function
[] SW
[] LFE
[] SP A/SP B
Lights up when sub wooli:r
selection is set to "YES" (page
42) and the audio signal is
output from the SUB
WOOFER jack.
Lights up when the disc being
played back contaius an LFE
(Low Frequency Effect)
channel and the LFE chaunel
signal is actually being
reproduced.
Lights up according to the
speaker system used. However,
these indicators do not light up
if the speaker output is turned
ofl or if headphones are
couuected.
[] nOD
Lights up when the receiver is
decoding Dolby Digital
signals.
Note
When playing a Dolby Digital
fl_rmat disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to "ANALOG" (page 58).
Name Function
[] OO PI_/
Orl PLII
-rlo PL" lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
"Flrt PLII" lights up when the
Pro Logic II Movic/Music
decoder is activated.
However, these indicators do
not light up if both the center
aud surrouud speakers are set to
"NO" (page 38) and you select
a sound field using the A.F.D.
button.
[] OPT
[] DTS
Lights up when VIDEO 2 input
is selected. However,
"UNLOCK" appears on the
display if no digital signal is
input through the OPTICAL
.jack. "OPT" also lights up
when SAT input is selected if
INPUT MODE is set to
"AUTO IN" and the source
signal is a digital signal being
input through the OPTICAL
j_,ck.
INPl JT MODE is set to "OPT
IN" (page 58).
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is not set to
"ANALOG" (page 58).
8 G8