Sony SXRD KDS-60A2020 Operating Instructions Manual page 59

Sxrd projection tv
Table of Contents

Advertisement

Other Information
"High Temperature Waruing"
7A
Make sure to remove dust from the ventilation slots oil the rear and both sides of
message appears
the TV. In addition, make sure that there are no obstacles in front of the ventilation
slots. If the message still appears after the dust or obstacles are removed, the TV
may need servicing. Call your local Sony Service Center.
The TV does not turu on
Vj
The TV cools down its projection lamp when the power is turned off. It takes up to
two minutes for the picture to come back after the TV is turned on again. Wait for
........................
a while nntil the P!cture c0mes back
................................
Small bright or black clot in
_
It may be possible to see one or two pixels, whicla appear clark or bright when
picture
viewing tip close to the screen caused duriug the manufacturing of the display
device. This is uot a defect with your TV and will not affect the overall picture
performance or reliability of your set. Please view the screen at the recommended
viewing distauces.
Image left ou the screen (image 1_
Turn off the TV t_r a while or let the TV run on another channel. Unlike plasma
retention)
TV and CRT TM image retention ou tiffs TV is not permanent. It is only a
temporary conditiou; see page 10.
White spot ou the screen when _
If screen is exposed to direct sunlight or strong ambient light, part of the screen
powered oft"
may appear white even when TV is power off. This is due to the strong light
reflecting off the TV screen and reflections coming behind the screen. This is a
structural property of the proiection TV and is not a defect. Position your TV
away t¥om such light sources.
"Proiection lamp is nearing end 1_
It is time for you to replace the proiection lamp used in your TV.
of life. Please replace the
• Turn to page 51 ou "How to Replace the Lamp" and follow the directions for
lamp." message appears
replacing the lamp.
• Use only the lamp designated for your TV model.
• Set the Lamp Replacement
option in the Setup settings (see page 47).
o
59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sxrd kds-50a2020Sxrd kds-55a2020

Table of Contents