Table of Contents
Advertisement
Basic Operations
Programming
the Remote Control
The remote control is preset to operate
Sony brand video equiplnent.
BD/DVD
101 (Sony Blu-ray Disc Player)
DVR/VCR
901 (Sony Dream System)
SAT/CABLE
801 (Sony Satellite Receiver)
Follow the steps below to program
your TV's remote control to operate
non-
Sony video equipment.
Find the three-digit
code for your equipment
fi:om the
Manutacturer.;
Codes"
listed on page 27. If more than one code number
is listed, try
entering
from the code listed first.
]
SaT,CaBLE
Press and hold the _,...........
_
or _
FUNCTION button you want to
program
on the remote control and press the _
button simultaneously.
The selected
FUNCTION
button (BD/DVD,
DVR/VCR
or
SAT/CABLE)
will flash.
[]
Enter the three-digit
manufacturer's
code number
using the @-(_)
buttons
while the FUNCTION button is lit. [f the code is not entered
within
10 seconds,
you must start again from step 1.
[]
Press the @ button while the FUNCTION button is lit.
When the programming
is correct,
the selected
FUNCTION button
blinks twice, and when not, blinks five times.
To check if the code works
Aim your TV's remote
control at the equipment,
and press the green
button.
If you can turn the equiplnent
on and off by using the remote control,
then the programming
is complete.
If not, try the next code listed.
26
Hide quick links:
Advertisement
Table of Contents
