Changing The Transmitting Frequency - Sony CDX-530RF Installation/Connections Manual

Wired remote (RM-X87)
Note
The supplied wireless remote (RM-X89) can be
operated almost like the wired remote (RM-X87).
DISC +/-
Changing the transmitting
frequency
Because this unit processes CD playback sound
through an FM tuner, there may be interference
no,he during CD playback. In such a case, change
the frequency of the modulated RF signal
transmitted from the unit. The initial setting is
883 MHz.
1 Press _ for two seconds until
frequency appears.
2 Press _ or _ repeatedly to
select the frequency.
Each time you press _ or (]_!_E), the
frequencies change as follows:
:88.3 MHz _ 89.9 MHz --* 89.7 MHz
89.5 MHz ---* 89.3 MHz --*
89.1 MHz _ 88.9 MHz --* 88.7 MHz
--* 88.5 MHz _ 88.3 MHz
:88.3 MHz .--* 88.5 MHz --_ 88.7 MHz
--_ 88.9 MHz _ 89.1 MHz ---*
8g.3 MHz .--* 89.5 MHz ---* 89.7 MHz
-+ 89.9 MHz _ 88.3 MHz
3 Press _ for two seconds.
Using on the wireless remote
1 Press _ for two seconds until
frequency appears.
2 Press _ or _ repeatedly to
select the frequency.
3 Press _ for two seconds.
Notes
• Whenyou changethe transmitting frequency on the
unit, be sure to tune your FM tuner to the newly
selected one,
• Press _ on the wired remote before changing the
frequency if the power of the unit is turned off.
8