Using The Security Lock - Epson Stylus CX6600 Quick Manual

Using the Security Lock

If you want to prevent unauthorized use of your CX6600, you can activate its
security lock feature. The security lock requires you to enter a PIN (Personal
Identification Number) whenever you turn on the CX6600. If you forget your
PIN code, you can still regain access to your CX6600 (see page 8).
To enable the security lock, you must first run the Security Lock program on a
computer connected to the CX6600. To set up your CX6600 and install its
software, see the Start Here sheet.
Follow these steps to activate the security lock:
1. Press the P
2. Insert your Stylus CX6600 software CD-ROM.
3. Windows: If you see the Software Installation screen, click
SecurityLockTool
EPILOCE4
Macintosh: The Epson folder automatically opens (if it doesn't, double-click
the Epson CD-ROM icon). Then double-click the
Note:
You can also copy the program to your system by dragging its icon from the
CD-ROM onto your hard drive.
You see a screen like this one:
4. Make sure
is selected, then click
5. At the confirmation screen,
click again, then click
OK
to close the program.
Cancel
You have now enabled the
Security Lock menu on the
CX6600.
6
Using Your Stylus CX6600
button to turn on your CX6600.
On
folder on your software CD-ROM, then double-click the
icon.
Security Lock On
.
OK
. Open the
Exit
icon.
Security Lock