Ink Cartridge Safety Instructions - Epson Stylus CX6600 Quick Manual

Epson user's guide printer cx6600
Hide thumbs Also See for Stylus CX6600:
Table of Contents

Advertisement

Do not block or cover openings in the Stylus CX6600 case or insert objects through
the slots.
Except as specifically explained in your documentation, do not attempt to service the
Stylus CX6600 yourself.
Unplug the Stylus CX6600 and refer servicing to qualified service personnel under
the following conditions: if the power cord or plug is damaged; if liquid has entered
the product; if the product has been dropped or the case damaged; if the product does
not operate normally or exhibits a distinct change in performance. Adjust only those
controls that are covered by the operating instructions.
Before transporting the Stylus CX6600, make sure the print head is capped in the far
right position and the ink cartridges are in place.
This product includes a lamp component that contains mercury (Hg). Please consult
your state and local regulations regarding disposal or recycling. Do not put in the
trash.

Ink Cartridge Safety Instructions

Leave the ink cartridges installed. Removing the cartridges can dehydrate the print
head and may prevent the Stylus CX6600 from printing.
Keep ink cartridges out of the reach of children and do not drink the ink.
Be careful when you handle used ink cartridges; there may be ink remaining around
the ink supply port. If ink gets on your skin, wash it off with soap and water. If it gets
in your eyes, flush them immediately with water.
Do not put your hand inside the Stylus CX6600 or touch the cartridge during
printing.
Do not move the print head by hand; otherwise you may damage the Stylus CX6600.
Install the ink cartridge immediately after you remove it from its package. Leaving the
cartridge unpacked for a long time before use may result in reduced print quality.
Do not use an ink cartridge beyond the date printed on the cartridge package. For
best results, use up the ink cartridges within six months of first installing them.
Store ink cartridges in a cool, dark place. Store each ink cartridge so that the bottom
of its package faces down.
After bringing an ink cartridge inside from a cold storage site, allow it to warm up at
room temperature for at least three hours before using it.
Do not remove or tear the label on an ink cartridge; this can cause leakage.
Do not dismantle the ink cartridges or try to refill them. This could result in damage
to the print head.
42
Notices

Advertisement

Table of Contents
loading

Table of Contents