Scanning To A Card - Epson Stylus CX6600 Quick Manual

Scanning to a Card

Follow these steps to scan an image to a memory card and save it in JPEG format:
1. Make sure your CX6600 is not connected to your computer (or your
computer is turned off ), then insert a memory card (see page 20).
Note:
If the card is not properly formatted, you see a message on the LCD screen. Press
the button indicated on the LCD screen to format the card. Any data stored on the
card will be erased.
2. Press the
3. Press the green button next to the LCD screen until
then press
Note:
You can also scan to your computer or create an e-mail with the scanned image
attached. Select either To PC or To E-mail, then see your on-screen Reference
Guide for details.
4. Select the document type (
5. Select
Auto
your document are light in color, they may
not be detected and part of your image may
be cut off; in that case, select
the entire area.)
6. For ordinary documents, select
the quality of the scanned image. For
higher quality, select either
or
Graphic
Note:
Higher quality images take up more space on the memory card.
7. Press the button next to
8. Make sure your original document is placed on the scanner glass, then press
the x
Color
folder on the memory card.
Caution:
Never open the scanner while scanning or copying, or you could damage the
CX6600.
9. Wait until scanning finishes and the memory card light stops flashing, then
remove the card.
30
Scanning to a Card
button to enter Scan Mode.
Scan
.
OK
Text
as the scan area. (If the edges of
(for photos).
OK
button to start scanning. Your image is saved to the "epscan"
or ).
Graphic
to scan
Max.
as
Normal
(for text)
Fine
(shown on the LCD screen).
To Photo Card
Document type
Image quality
appears,
Scan area