Changing Copy Settings - Epson Stylus CX6600 Quick Manual

3. Close the scanner lid.
4. Press the
5. The default copy settings are displayed on the LCD screen. Change any
necessary copy settings, as described in "Changing Copy Settings" below.
6. Press the x
make black-and-white copies). Your document is scanned then printed. If
you're using the
page 17), follow the instructions on the LCD screen to scan additional sheets.
Caution:
Never open the scanner while scanning or copying, or you could damage the
CX6600.

Changing Copy Settings

The current copy settings are shown on the LCD screen. You can change the
settings as described below.
Copy Mode button
Note:
You can save the current copy settings (except for the number of copies) by pressing
the Save button for 3 seconds until you see the message "Stored" on the screen. To
recall these settings, press and hold the Recall button for 3 seconds.
If you want to clear the current copy settings and return the CX6600 to its default
settings, press and hold the Reset button for 3 seconds.
14
Copying
button to enter Copy Mode.
Copy
button (to make color copies) or the x
Color
or
2-up 4-up
Paper type
Print quality Menu selection buttons
Copy Layout setting (see "Copy Layout" on
Reduce/enlarge
button (to
B&W
Number of copies
Paper size