Channel List - Sylvania LD195SSX Owner's Manual

[] Channel List
Thechannelsselected herecanbe skippedwhen selecting the channels
using [CHA/V].
Those channels canstill be selectedwith [the Number buttons].
_ Press [SETUP] to display the main menu.
_ Use [Cursor A/V] to select"CHANNEU', then press
[ENTER].
or
[] Nlanual Register
Thisfunction letsyou addthe channelsthat were not addedby
the autoscandueto the receptibleconditionat the initial setting.
_ Press [SETUP] to display the main menu.
_ Use [Cursor A/V] to select"CHANNEL", then press
[ENTER].
or
i¸ii
il .....................
iiiii!iill
3
Use [Cursor AIr] to select "Channel List", then press
[ENTER].
or
_ Use [Cursor A/V] to select "Manual Register", then
press [ENTER].
or
g_ Use [Cursor A/V] to select the channel you want to
remove, then press [ENTER].
or
Y
. The channel display for the removed channel
darkens. You will not be able to select the channel
again using [CH A/V].
, To reactivate a removed channel, use [Cursor A/V] and
press [ENTER]. The registered channels are highlighted.
, When you remove a main channel, its subchannels
are removed as well.
Note:
o The channel with the "DTV" indicated on the display is
ATSC.Otherwise the channel is NTSC.
_ Press [SETUP] to exit.
g_ Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
@@@
@@@
@@@
@@
ii i !! !il
_ Press [SETUP] to exit.
Note:
• If setup completes successfully,
"Added to the channel list" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen.
o By using [CHA/Y], you can select the memorized
channels only.
!
!
EN