Page 1
32” Digital / Analog LCD TV built-in DVD Player Owner’s Manual LD320SS8 HIGH-DEFINITION TELEVISION TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA. IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com...
NTRODUCTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION THIS SYMBOL INDICATES THAT DANGEROUS RISK OF ELECTRIC SHOCK VOLTAGE CONSTITUTING A RISK OF ELECTRIC DO NOT OPEN SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT THERE ARE...
Precautions LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
NTRODUCTION LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. •...
Features • DTV/TV/CATV • Dolby Digital Sound You can use your remote control to select channels - Enjoy Dolby Digital multi-channel surround sound which are broadcast in digital, conventional analog, when you connect the unit to your Dolby Digital standard definition, and high definition formats. decoder.
Remote Control Function INPUT SELECT button (p16) 18. EJECT A button (p29) Press to access connected external devices like Press to eject the disc. a DVD recorder or VCR. 19. AUDIO button (p16 / p37) POWER button (p13) • Digital mode (DTV) Press to turn the unit on and off.
NTRODUCTION Control Panel 1. POWER button (p13) Press to turn the unit on and off. side of this unit 2. INPUT SELECT button (p16) • Press to access connected an external devices like a DVD recorder or VCR. • Press to decide the command of setting when the menu is displayed.
ONNECTION Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: • Be sure your antenna or other device is connected properly before plugging in the power cord. [Antenna Cable Connection] When connecting the unit to an antenna or cable TV company (without cable/satellite box) Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.
ONNECTION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [HDMI Connection] HDMI (High Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to this unit is of the highest possible resolution. rear of this unit To HDMI 1-IN or e.g.)
Page 11
Cables not included. Please purchase the necessary cables at your local store. [S-video Cable Connection] S-video connection offers good picture quality for video devices connected to the unit. Use an S-video cable to connect the unit to external video devices equipped with S-video output jack. If you connect to the unit’s VIDEO 1or VIDEO 2 S-video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO 1 or VIDEO 2 accordingly.
Page 12
ONNECTION Cables not included. Please purchase the necessary cables at your local store. [Audio Output Connection] [Digital] If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. [Analog] If you connect this unit to an external analog audio device, you can enjoy stereo (2 channel) audio. AUDIO IN e.g.) Stereo system...
NTIAL SETTING These operations are accessible by remote control. Some may also be accessible by controls on the main unit. TV Functions Initial Setup Note: • If you connect the cable system directly, contact the CATV This section will guide you through the unit’s initial setting which includes installer.
NITIAL SETTING And select the sound input for the HDMI jack if your • When aerial antenna is connected, select “Air”. • When connected to CATV, select “Cable”. TV is connected to a HDMI device. • Scanning and memorizing of channels start (Refer to “HDMI Audio”...
ATCHING TV Channel Selection Volume Adjustment Select channels by pressing [CH K / L] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. • To select the memorized channels, use [CH K / L] or Use [VOL.
ATCHING TV To Cancel the Sleep Timer Switching Audio Mode Press [SLEEP] repeatedly until “Sleep Off” is displayed This section describes how to switch the audio language. on the TV screen. Note: • The sleep timer setting display will automatically Press [AUDIO] to display the currently selected disappear in 4 seconds.
Screen Information Note: • When the program guide consists of more than 4 lines, use You can display the currently selected channel or other information such as [Cursor K/ L] to scroll. the audio mode on the TV screen. • “No description provided” is displayed when the program guide is not provided.
ATCHING TV For 16:9 video signal TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [SCREEN MODE ] repeatedly to switch the TV aspect ratio.
PTIONAL SETTING Channel List Manual Register The channel list function lets you remove undesired channels from the The manual register function lets you add the channels that were not added channel registration list. by the auto channel scan due to the reception condition at the initial setting. Press [SETUP] to display the main menu.
PTIONAL SETTING Antenna Confirmation Picture Adjustment This function lets you check the signal strength of each channel. You can adjust brightness, contrast, color, tint and sharpness. Press [SETUP] to display the main menu. Press [SETUP] to display the main menu. Use [Cursor K / L] to select “PICTURE”, then press Use [Cursor K / L] to select “CHANNEL”, then press [ENTER].
Reset Settings Use [Cursor K / L] to select “Reset”, then press [ENTER] Use [Cursor K / L] to select the sound type you want to to restore the “Picture Mode” setting to default. adjust, then press [ENTER]. Reset Settings Reset Settings Sound Sound...
PTIONAL SETTING Closed Caption CC2, CC4, Text2 and Text4; are rarely available and broadcasters use them only You can view closed captioning (cc) for TV programs, movies and news. in special conditions, such as when “CC1” and “CC3” Closed caption refer to text of dialogue or descriptions displayed on-screen or “Text1”...
DTV Closed Caption Use [Cursor K / L] to select “Closed Caption”, then press [ENTER]. In addition to the basic closed caption described on page 22, DTV has its Detail Detail own closed caption called DTV CC. Use this menu to change the settings for Closed Caption DTV CC.
PTIONAL SETTING [Font Size] [Edge Type] Font size of the displayed caption can be switched as Edge type of the displayed caption can be switched as below. below. CC Style CC Style Closed Caption CC Style CC Style Closed Caption User Setting User Setting Font Style...
Page 25
Note: Note: • When you select a rating and set it to “Block”, the higher • Changing the category to “Block” or “View” automatically ratings will be blocked automatically. The lower ratings changes all its sub ratings to the same (“Block” or “View”). will be available for viewing.
PTIONAL SETTING PC Settings Sub Rating Category Rating This function lets you adjust the PC screen position, clock and phase during Fantasy Violence TV-Y7 PC input. Violence TV-PG Repeat steps 1 and 2 in “Closed Caption”on page 22. Sexual Situation TV-14 TV-MA Coarse Language...
Blue LED Press [SETUP] to exit. You can set the blue LED on the front panel to light up when the unit is turned on or when a disc is inserted. Repeat steps 1 and 2 in “Closed Caption”on page 22. Use [Cursor K / L] to select “Blue LED”, then press Note: [ENTER].
PERATING DVD DVD Functions Playable Media Recorded Type of media Mark (logo) Region code Media size Disc types signals DVD-video *1, 2, 4, 6, 10, 11 DVD-RW DVD-R e.g.) digital video title1 title2 * 1, 3, 4, 5, (MPEG2) chapter 1 chapter 2 chapter 3 chapter 4 chapter 1 chapter 2 6, 7, 8, 9, 10 DVD+RW DVD+R...
These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Playback Disc Menu Some discs contain disc menus which describe the contents of the disc or JPEG on page 30) allow you to customize disc playback, or title menu which lists the titles Before you begin: available on the DVD.
PERATING DVD Fast Forward / Fast Reverse Once a desired zoom factor is set, use [Cursor K / L / s / B] to slide the zoomed picture across the TV screen. Press [FWD D] or [REV E] repeatedly during playback to select the required forward or reverse speed.
Kodak Picture CD Note: • A file with an extension of “.mp3 (MP3)” is called an “MP3 JPEG file”. • A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is The unit can also run JPEG files stored on Kodak Picture CD. The Picture CD is called a “JPEG file”.
PERATING DVD Dual Playback Note: • To cancel folder playback, press [MODE] again at step 1. JPEG • If you press [FWD D] or [REV E] during folder playback, a JPEG file will be paused. This function lets you play back MP3 and JPEG files simultaneously. •...
Using [SKIP H , G] Press [BACK/RETURN] to exit. During playback, press [SKIP H, G] repeatedly until a desired chapter or title will be selected. current chapter (CH) CH 1 CH 2 CH 3 CH 4 [SKIP H] [SKIP G] Note: •...
PERATING DVD Direct Search Direct Search Using [SKIP H , G] During playback, press [SKIP H, G] repeatedly until JPEG a desired track/file will be selected. w/o PBC current track/file Press [the Number buttons] to select your desired (TR) chapter, title, track/file. TR 1 TR 2 TR 3 TR 4 [SKIP H] [SKIP G]...
Repeat A-B Playback Programmed Playback JPEG You can repeat playback between A and B on a disc. You may determine the order in which tracks will play back. During playback, press [A-B] at your desired starting point (A). In stop mode, press [MODE] repeatedly until “PROGRAM”...
PERATING DVD On-screen Display w/o PBC You can check the information about the current disc by pressing [INFO] on the remote control. current playback status 4/12 0:03:21 - 0:02:15 remaining time of the current appears only when multi- track angle is available on the DVD elapsed time of the current track current playback status TR (Track):...
Special Settings • Each time you press [AUDIO], the audio language changes as example below. Subtitle Language Subtitle Language (English audio) (Spanish audio) This unit allows you to select a subtitle language (if available) during DVD playback. (French audio) During playback, press [SUBTITLE] repeatedly until the desired language appears.
Page 38
PERATING DVD Stereo Sound Mode Stereo Sound Mode Marker Setup Marker Setup w/o PBC This feature allows you to assign a specific point on a disc to be called back later. This unit allows you to select a sound mode during CD playback. To set a marker During playback, press [AUDIO] repeatedly until the desired sound mode appears.
ETTING DVD Settings are only effective when the unit is in DVD mode and any discs should not be played back. [SUBTITLE] *1, *2 (Default: OFF) DVD Language Setting Select the desired subtitle language. You can change the desired language when playing back the disc. Press [SETUP] to display the main menu.
ETTING DVD DVD Audio Setting [DOWN SAMPLING] (Default: ON) Set “DOWN SAMPLING”. Choose the appropriate audio settings for your equipment. It only affects This function is available only on digital outputting of a during the playback of DVD. disc recorded in 96kHz. Press [SETUP] to display the main menu.
Parental Setting Use [Cursor K / L ] to select the desired item, then press Parental setting prevents your children from viewing inappropriate materials. (password protected.) Playback will stop if the ratings exceed [ENTER]. the levels you set. Press [SETUP] to display the main menu. PARENTAL PARENTAL LEVEL 8 [ ADULT ]...
ETTING DVD Others FIELD : the picture in the still mode will be stabilized. You can change the other functions. FRAME : the picture in the still mode will be highly defined. Press [SETUP] to display the main menu. OTHERS ANGLE ICON STILL MODE AUTO...
Reset to the Default Setting Language Code List You can reset all the settings except for the parental setting and on-screen Language Code Language Code menu language. Marathi 5964 Abkhazian 4748 Moldavian 5961 Afar 4747 Press [SETUP] to display the main menu. Mongolian 5960 Afrikaans...
ROUBLESHOOTING Troubleshooting Guide If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following chart once before calling for service. Symptom Remedy No power • Be sure the power cord is plugged in. •...
Page 45
Symptom Remedy The entered channel number • Many digital channels have alternate channel numbers. TV changes the changes automatically numbers automatically to the ones signifying the broadcasting stations. These are the numbers used for analog broadcasts. Remote control does not work •...
NFORMATION Maintenance Cabinet Cleaning Servicing • Wipe the front panel and other exterior surfaces of the unit with a soft Should your unit become inoperative, do not try to correct the problem cloth immersed in lukewarm water and wrung dry. yourself.
Cable Channel Designations If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations. CATV channel TV Display W+2 W+3...
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.