Sylvania LD195SSX Owner's Manual page 49

My remote control does not work.
What should I do?
. Check the antenna or cable connection to the main unit.
. Check the batteries of the remote control.
. Check if there is an obstacle between the infrared sensor window and the
remote control.
. Test the signal output. If OK, then possible infrared sensor trouble.
(Refer to"lR Signal Check" on page 52.)
. Aim the remote control directly at the infrared sensor window on the
front of the unit.
. Reduce the distance to the unit.
. Re-insert the batteries with their polarities (+/- signs) as indicated.
. When there is an infrared-equipped device such as PC near this unit, it
may interrupt the remote control signal of this unit.
. Move the infrared-equipped device away from this unit, change the angle
of the infrared sensor or turn off the infrared communication function.
I
How come the n t a setup appears every , Connect the RF coax a cab e to the un t d rect y and run the n t a setuP.
time I turn on this unit? . Make sure to complete the Channel Scan before turning off the unit.
. Make sure autoscan has been completed.
(Refer to "Autoscan" on page 20.)
. Autoscan must be completed when you set up the unit for the first
time or move it to a location where previously unavailable channels are
broadcast.
. The selected channel may not be broadcasting.
Why I cannot watch some of TV programs? . When autoscan is interrupted and not completed,
some channels will not be received. Make sure to complete.
(Refer to "Autoscan" on page 20.)
. The selected channel cannot be viewed by the"Child Lock"setting.
(Refer to "Child Lock" on page 28.)
. The unit requires some kind of antenna input. An indoor antenna (rabbit
ears), an external antenna, or an RF coaxial cable from your wall or cable
receiver/satellite box needs to be plugged into the unit.
i _ _ check if the right inpui mode is SeleCted by p ressing [INPUT SELECT]
[How come there is no image from the using [CH A/Y]. (Refer to %witching Each Input Mode'_ on page 17.)
connected external devices7. Check the antenna or cable connection to the unit.
. Many digital channels have alternate channel numbers. The unit changes
Whenever I entered channel number, the numbers automatically to the ones signifying the broadcasting
it changes automatically, stations. These are the numbers used for analog broadcasts.
, €lean the disCl ....
'i Ensure the disc is Correctly inser ted.
M d:sCcanno'be a edback , Check if the disc is defec!ve by tFying another disc.
y<l [ p y "_: ,Cance!theparenta !ock or change the contro eve!
[s [nere any way [ can Day my a sc
i ' Insert a correct disc that plays back on this unit,
; Handle a disc with special Care So that it does not have fingerprints ,
Scratches or dusts on its Surface.
Why are captions not displayed entirely?
Or, captions are delayed behind the
dialogue.
[ How can i set the CloCk?
. Captions that are delayed a few seconds behind the actual dialogue are
common for live broadcasts. Most captioning production companies can
display a dialogue to maximum of 220 words per minute. Ifa dialogue
exceeds that rate, selective editing is used to insure that the captions
remain up-to date with the currentTV screen dialogue.