Table of Contents
Advertisement
To clear this error, select Clear Warning from the control panel's
Reset Menu. For instruction about accessing the control panel
menus, see "How to access the control panel menus" on page 223.
Color Data Received
The printer receives color printing data when it is in the B/W or
4 × B/W mode. Press the N Start/Stop button to print the data in
monochrome, or press the + Cancel Job button to cancel the
print job.
Cooling Down
The printer lowers its temperature to optimize for the fixing toner.
Wait for a moment for Ready to appear in the LCD panel.
Duplex Memory Overflow
There is not enough memory for duplex printing. The printer
prints only on the front and ejects the paper. To clear this error,
follow the instructions below.
If Off is selected as the Auto Cont setting on the control panel's
Setup Menu, press the N Start/Stop button to print on the back
of the next sheet, or press the + Cancel Job button to cancel the
print job.
If On is selected as the Auto Cont setting on the control panel's
Setup Menu, printing continues automatically after a certain
period of time.
Formatting HDD
The Hard Disk Drive is being formatted.
Form Data Canceled
Using the Control Panel
7
7
7
7
7
7
7
7
7
7
7
7
265
Advertisement
Table of Contents
