Setting Up Your Printer As A Shared Printer - Epson C2600/2600 Owner's Manual

❏ For Windows XP, 2000, NT 4.0, or Server 2003, see "Using an
additional driver" on page 136.
Setting the clients
❏ For Windows Me or 98, see "With Windows Me or 98" on page
143.
❏ For Windows XP or 2000, see "With Windows XP or 2000" on
page 145.
❏ For Windows NT 4.0, see "With Windows NT 4.0" on page
149.
Note:
❏ When sharing the printer, be sure to set EPSON Status Monitor 3
so that the shared printer can be monitored on the print server. See
"Setting Monitoring Preferences" on page 118.
❏ When you are using shared printer in a Windows Me or 98
environment, on the server, double-click the Network icon in
Control panel and make sure that the "File and printer sharing for
Microsoft Networks" component is installed, then on the server and
clients, make sure that the "IPX/SPX-compatible Protocol" or the
"TCP/IP Protocol" is installed.
❏ The print server and clients should be set on the same network
system, and they should be under the same network management
beforehand.
❏ The screen may vary depending on your operating system version.

Setting up your printer as a shared printer

When the print server's OS is Windows Me or 98 follow the steps
below to set the print server.
1. Click Start, point to Settings, then click Control Panel.
134
Using the Printer Software with Windows