Table of Contents
Advertisement
ASSEMBLY
Assembly requires two persons.
Because of its size and weight, assemble
the
weight bench in the location where it will be
used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble
it.
Place all parts in a cleared area and remove
the packing materials.
Do not dispose
of the
packing
materials
until you complete
ail
assembly
steps.
To identify small parts, see page 5.
The following
tools (not included) may be
required for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
(]_:::;====_
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
.
Orient the Front Stabilizer (29) so that the warn-
ing decals are facing upward.
Attach the Front Stabilizer (29) to the Front Leg
(2) with two M10 x 63mm Carriage Bolts (18)
and two M10 Locknuts (19). Do not tighten the
Locknuts
yet.
19
18
arning
Decals
.
Attach the Front Leg (2) to the Frame (1) with
two M10 x 63mm Bolts (16), two M10 Large
Washers (27), and two M10 Locknuts (19). Do
not tighten
the Locknuts
yet.
19
19
27
27
6
Hide quick links:
Advertisement
Table of Contents
