Dialing Options - Samsung SPH-M350 Online Manual

Dialing Options

When you enter numbers in standby mode, you will
see a variety of dialing options displayed as softkeys on
the phone's screen.
To send a message to the number, press
(left softkey).
– or –
To initiate a dialing option, press
and choose one of the following options.
to display the details for a Contact if the
Contact Details
entered number matches a previously created entry.
Save to enter a seven-digit or ten-digit number
(phone number and area code) and press
to save the phone number in your Contacts.
Save
(See "Saving a Phone Number" on page 31.)
Hard Pause to enter digits and then use this feature to
enter a hard pause within a number string (the
phone waits for your input). To continue dialing, you
must press the key. (See "Dialing and Saving
Phone Numbers With Pauses" on page 32.)
Send Msg
(right softkey)
Options
Options >
to enter digits and then use this feature to
2sec Pause
enter a 2 second delay within a number string (the
phone continues dialing after 2 seconds without any
additional keys being pressed). (See "Dialing and
Saving Phone Numbers With Pauses" on page 32.)
Tip To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed
dial number is two digits, enter the first digit, and then
press and hold the second digit. (For information on
setting up speed dial numbers, see "Assigning
Speed Dial Numbers" on page 76.)
Answering Calls
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2.
Press to answer an incoming call.
(Depending on your settings, you may also answer
incoming calls by pressing any number key. See
"Call Answer Mode" on page 63 for more
information.)
Section 2A. Phone Basics 27