Processing The Work Table; Machine Head Support - Brother FD4-B271 Specifications

Processing the work table

* This sewing machine is a fully-submerged type. Refer to the diagram below to prepare the work table and
the machine head support. Furthermore, if processing a folding-type work table, you will need parts which
are sold separately. (Refer to page 13.)
* The top of the table should be 40 mm in thickness and should be strong enough to hold the weight and
withstand the vibration of the sewing machine.

Machine head support

*1 Machine head support connection positions
*2 Motor mounting holes
*3 Depth 10
*4 Machine head support plate mounting holes
*5 Depth 8
*6 Chain guide mounting hole
FD4 B271, B272 12/27
2000.7