3. Use the tab (C) to release the LVDS cable from LCD panel connector (D)
Figure 3-47. LVDS Cable
4. Remove the LVDS and camera cable from the LCD panel
LVDS and Camera Cable Installation
1. Place LVDS and camera cable on the rear of the LCD panel. Refer to
2. Adhere the clear mylar tape (B) to secure the camear cable in place. Refer to
Figure
3-47.
3. Use the tab (C) to connect the LVDS cable to the LCD pane connector (D). Refer to
Figure
3-47.
4. Replace the adhesives to secure the LVDS and camera cable in place
5. Install LCD panel.
3-48
C
D
.
Machine Maintenance Procedures
(Figure
3-47).
0
Figure 3-45
.
(Figure
3-45).