2. Starting from the top, remove the clear mylar tape (C) and disconnect the LVDS cable
from the LCD panel connector (B)
Figure 3-35. LVDS Cable Connector
LVDS Cable Installation
1. Place the LVDS cable into the LCD panel connector (B) and secure the clear mylar tape
(C)
Figure 3-35
(
2. Place the LVDS cable (A) on the rear of the LCD panel. Refer to
3. Install the LCD panel.
Machine Maintenance Procedures
Figure 3-35
(
C
).
).
B
Figure
0
3-34.
3-39