LVDS and Camera Cable Removal
Prerequisite:
LCD Panel Removal
1. Remove the yellow tape (A) securing the LVDS and camera cable on the rear of the
LCD panel
(Figure
Figure 3-46. LVDS and Camera Cable
2. Starting from the top, remove the clear mylar tape (B) and disconnect the LVDS cable
from the LCD panel connector (C)
Figure 3-47. LVDS Cable
3. Remove the LVDS and camera cable from the LCD panel
Machine Maintenance Procedures
3-46).
(Figure
A
3-47).
B
C
.
0
3-45