Keyboard Module Installation
1. Place the keyboard (E) face down on the keyboard frame (D). Refer to
2. Place and align the keyboard bracket with the keyboard. Refer to
3. Install and secure fourteen (14) screws to the keyboard bracket. Refer to
4. Place the keyboard module (C) face down on the base assembly
5. Connect keyboard FPC (A) to mainboard connector (B). Refer to
6. Turn the keyboard module over and align the keyboard module with the the base
assembly. Make sure align it properly to the edge of the system.
7. Install and secure fifteen (15) screws to the keyboard module. Refer to
8. Install Palm Rest Cover.
ID
Red
Call out
Green
Call out
Blue
Call out
ϕ
Yellow
1.6*2.5 NI
Call out
3-24
Size
M2.5*6
M2*3
M2*2
Quantity
8
9
4
8
Machine Maintenance Procedures
Figure
3-22.
Figure
3-21.
Figure
3-20.
(Figure
3-19).
Figure
3-19.
Figure
3-18.
Screw Type
0