Lenovo ThinkServer TS130 User Manual page 74

Table 19. Submenus under the Automatic Power On menu (continued)
Item
Wake Up on Alarm
Startup Sequence
Alarm Time (HH:MM:SS)
Alarm Date (MM/DD/YYYY)
Alarm Day of Week
Note: [ ] indicates the default setting.
Table 20. Items under the Security menu
Item
Hardware Password Manager
Current setting
Administrator Password
Power-On Password
Set Administrator Password
Set Power-On Password
Require Admin Password when
Flashing
Require POP on Restart
62
ThinkServer User Guide
Option
Single Event / Daily Event / Weekly
Event / [Disabled]
[Primary] / Automatic
[00]:00:00
[01] / 01 / 1999
[Sunday] / Monday / Tuesday /
Wednesday /Thursday / Friday /
Saturday
Option
[Enabled] / Disabled
Registered / Disabled / [Enabled]
Not Installed / Installed
Not Installed / Installed
Enter
Enter
Yes / [No]
Yes / [No]
Description
Enable or disable the Wake up on
Alarm function. This function enables
you to turn on your system on a day
of the month, a day of the week, or
daily.
Note: Values in these fields might be
overridden by the operating system.
Select the startup sequence after a
Wake Up on Alarm event.
Specify the time when the system is
to wake up.
Specify the date when the system is
to wake up.
Select the day of the week when the
system is to wake up.
Description
Configure this item to set, change, or
delete the Administrator Password.
To set a password, use characters
a-z and 0-9. Passwords are not case
sensitive.
Note: To delete the Administrator
Password, clear the corresponding
fields for each password.
Configure this item to set, change, or
delete the Administrator Password.
To set a password, use characters
a-z and 0-9. Passwords are not case
sensitive.
Note: To delete the Power-On
Password, clear the corresponding
fields for each password.
If No is selected, the Administrator
Password will not be required when
updating the system software.
If No is selected, the Power-On
Password will only be required when
the system is started with a cold boot.