Removing And Reinstalling The Front Bezel - Lenovo ThinkServer TS130 User Manual

6. Press the cover-release button on the side of the server and slide the cover to the rear of the server
to remove the cover.
Figure 7. Removing the server cover

Removing and reinstalling the front bezel

Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the
Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and
"Guidelines" on page 15. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to remove and reinstall the front bezel.
To remove and reinstall the front bezel, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See "Removing the server cover" on page 17.
18
ThinkServer User Guide