Lenovo ThinkServer TS130 Hardware Maintenance Manual page 79

Table 18. Items under the Power menu
Item
After Power Loss
Enhanced Power Saving Mode
Smart Performance Choice
Automatic Power On
Note: [ ] indicates the default setting.
Table 19. Submenus under the Automatic Power On menu
Item
Wake on LAN
Wake from PCI Modem
Wake from Serial Port Ring
Wake from PCI Device
Option
Power Off / Power On / [Last State]
[Disabled] / Enabled
[Better Acoustic Performance] / Better
Thermal Performance
Option
Primary / [Automatic] / Disabled
[Primary] / Automatic / Disabled
[Primary] /Automatic / Disabled
[Primary] / Automatic / Disabled
Description
This field shows whether the system
will stay on after ac power is removed
and then restored.
• Select Power On if you are using a
power strip to turn the system on.
• Select Power Off if you want the
system to remain off after the
power is restored.
• Select Last State to have the
system return to the previous state.
Enable or disable Enhanced Power
Saving Mode. When this function
is enabled, the system will enter
Enhanced Power Saving Mode when
it is powered off. The total power
consumption will be lower when it is
turned off.
Note: When Enhanced Power Saving
Mode is enabled, only the Wake
Up on Alarm function is supported.
The Intel Manageability Management
function cannot be used.
Enable the system to enter the lower
acoustic level or better thermal level.
Enter the submenus to view all the
options. See Table 19 "Submenus
under the Automatic Power On
menu" on page 67.
Description
Enable or disable the Wake on LAN
function and control which startup
sequence to use after a Wake on LAN
event.
Note: This item controls the wake-up
event from onboard LAN and PCI
LAN.
Enable or disable the Wake from PCI
Modem function and control which
startup sequence to use after a PCI
modem wake-up event.
Enable or disable the Wake from
Serial Port Ring function and controls
which startup sequence to use after a
serial port wake-up event.
Enable or disable the Wake from PCI
Device function and control which
startup sequence to use after a PCI
device wake-up event.
.
Chapter 6 Configuring the server
67