Lenovo ThinkServer TS130 Hardware Maintenance Manual page 75

Table 10. Submenus under the ATA Drive Setup menu (continued)
Item
Hard Disk Pre-delay
Note: [ ] indicates the default setting.
Table 11. Submenus under the Video Setup menu
Item
Select Active Video
Pre-Allocated Memory Size
Total Graphics Memory
Multi-Monitor Support
Note: [ ] indicates the default setting.
Table 12. Submenus under the Audio Setup menu
Item
Onboard Audio Controller
Note: [ ] indicates the default setting.
Option
[Disabled] / 3 Seconds / 6 Seconds / 9
Seconds / 12 Seconds / 15 Seconds
/ 21 Seconds / 30 Seconds
Option
IGD / PEG / PCI / [Auto]
32 MB / 64 MB / [128 MB]
128MB / 256 MB / [Maximum]
Enabled / [Disabled]
Option
[Enabled] / Disabled
Description
Force the BIOS to delay the
initialization of hard disk drives for up
to 30 seconds. The delay provides
your hard disk drives more time to
spin up before the BIOS initializes
them.
Description
Select the primary video device that
will be used for graphic output. If you
select Auto, the system will prioritize
video devices in the following
sequence: PEG (PCI-e Graphics
Device), PCI (PCI Graphics Device),
and IGD (Internal Graphics Device).
Notes: When you select IGD, the
following items will be hidden:
• Pre-Allocated Memory Size
• Total Graphics Memory
• Multi-Monitor Support
Memory allocated to IGD.
Total memory allocated to graphics
devices.
Note: This function works only
when you are using the Windows XP
operating system on your server.
Enable or disable the multi-monitor
support function.
Description
Enable or disable the onboard audio
controller.
.
Chapter 6 Configuring the server
63