Lenovo ThinkServer TS130 Hardware Maintenance Manual page 25

Figure 4. Rear connector locations
1
Power cord connector
2
Serial port
3
VGA monitor connector
4
DisplayPort connector
5
USB connectors (6)
6
Ethernet connector
Connector
Audio line-in connector
Audio line-out connector
DisplayPort connector
Ethernet connector
Microphone connector
Serial port
7
Microphone connector
8
Audio line-out connector
9
Audio line-in connector
10
PCI Express x16 card slot bracket
11
PCI Express x1 card slot bracket
12
PCI card slot brackets (2)
Used to receive audio signals from an external audio device, such as a stereo
system. When you attach an external audio device, a cable connects the audio
line-out connector of the device to the audio line-in connector of the server.
Used to send audio signals from the server to external devices, such as powered
stereo speakers (speakers with built-in amplifiers), headphones, multimedia
keyboards, or the audio line-in connector on a stereo system or other external
recording device.
Used to attach a high-performance monitor, a direct-drive monitor, or other devices
that use a DisplayPort connector.
Used to attach an Ethernet cable for a local area network (LAN).
Note: To operate the server within FCC Class B limits, use a Category 5 Ethernet
cable.
Used to attach a microphone to your server when you want to record sound or if
you use speech-recognition software.
Used to attach an external modem, a serial printer, or other devices that use a
9-pin serial port.
Description
.
Chapter 4 Locating parts, controls, and connectors
13