Print Quality Problems - Epson 925 Daily Use

Print Quality Problems

Horizontal banding
Try one or more of these solutions:
Make sure that the printable side of the paper is face up in the
sheet feeder.
Run the Head Cleaning utility to clear any clogged ink
nozzles. See "Cleaning the Print Head" on page 65.
Make sure that the Media Type selected in the Control Panel
is appropriate for the type of media loaded in the printer.
Make sure that the position of the adjust lever is appropriate
for the media type. When printing on media of normal
thickness, set the adjust lever to the "0" position. When
printing on envelopes or thick media, set the position to "+".
74
Internal printer parts
need adjustment or
replacement.
The storage media or
PC card is not
compatible with this
printer.
An unknown printer
error has occurred.
Turn the printer off, and after a
few seconds, turn it on again. If
the error is not cleared, contact
your dealer.
Use a compatible storage media
or PC card. See "Loadable
storage media" on page 25.
Turn the printer off, and after a
few seconds, turn it on again. If
the error is not cleared, contact
your dealer.