Conditional Jump Relational Operators (Rel) - Casio FX-7400G PLUS User Manual

Send (
Function: This command sends data to an external device.
Syntax: Send (<data>) (...ex. Send (List 1))
Description:
1. This command sends data to an external device.
2. The following types of data can be sent by this command.
• Individual values assigned to variables
• List data (all values - individual values cannot be specified)
k k k k k Conditional Jump Relational Operators (REL)
, >, <, ≥, ≤
=,
G G G G G
Function: These relational operators are used in combination with the conditional
jump command.
Syntax:
<left side> <relational operator> <right side> ⇒ <statement>
Parameters:
left side/right side: variable (A to Z), numeric constant, variable expression (such as:
A × 2)
relational operator: =,
Description:
1. The following six relational operators can be used in the conditional jump com-
mand
<left side> = <right side> : true when <left side> equals <right side>
<left side>
<left side> > <right side> : true when <left side> is greater than <right side>
<left side> < <right side> : true when <left side> is less than <right side>
<left side> ≥ <right side> : true when <left side> is greater than or equal to <right
<left side> ≤ <right side> : true when <left side> is less than or equal to <right side>
2. See "⇒ (Jump Code)" for details on using the conditional jump.
P.152
, >, <, ≥, ≤
G G G G G
<right side> : true when <left side> does not equal <right side>
G G G G G
side>
Programming Chapter 8
_
: <statement>
^
(With Jump Code)
155