Casio CFX-9970G User Manual page 180

3. Press w to draw the line.
u u u u u To draw a line normal to a curve in the RUN or PRGM Mode
The following is the syntax for drawing a line normal to a curve in these modes.
Normal <graph function>, <
P.30 • Use the variable data (VARS) menu to specify the function to be graphed.
k k k k k Graphing an Inverse Function
This function lets you graph the inverse of the function used to produce your
original graph.
u u u u u To graph an inverse function in the GRAPH or TABLE Mode
Example
After graphing the function, display the sketch menu and press 4 (Inv).
• When graphing an inverse function when there is more than one graph function
stored in memory, select one of the functions and then press w.
u u u u u To graph an inverse function in the RUN or PRGM Mode
The following is the syntax for graphing an inverse function in these modes.
Inverse <graph function>
• Use the variable data (VARS) menu to specify the function to be graphed.
P.30
• You can only graph the inverse of functions whose graph type is specified as
rectangular coordinate type.
Graphing with the Sketch Function
x
-coordinate>
To graph the inverse of
y x x x
= ( + 2)( – 2)
10 - 2
[Sketch]-[Inv]
157