Epson Stylus Color 900N User Manual page 32

7. Select to monitor EPSON network printers that do not have drivers on
Monitor
your computer. Select
.
Next
Printers: Monitor_______ Do not monitor_______
If you have dial-up routers in a NetWare environment, they
may automatically dial up the next hop and you may be
charged for the line connection depending on the number of
hops you set. To prevent this and to keep network traffic to a
minimum, set hops carefully.
8. If you're using NetWare, set the number of hops (0 to 15) and click
Number of hops:_______
9. Check the current settings and click
10. Select and click
No
Now you install the second part of Status Monitor 2:
11. From the EPSON Installation Program screen, highlight
for EPSON Stylus COLOR 900N
12. Click , then follow steps 5 through 8, using the same settings you used in
Next
those steps.
13. Check the current settings and click
your computer.
14. After you restart your computer, right-click the green background monitoring
icon in your Startup group on the taskbar. Click
step turns off background monitoring, which may interfere with EPSON Net!2
when you configure the card. (See page 95 in your electronic EPSON Stylus
COLOR 900N Manual or Chapter 11 in your Administrator's Manual to turn on
background monitoring later.)
After you install the network software, configure the printer's Ethernet card for
TCP/IP (page 39), or use EPSON Net!2 to configure your printer for NetWare
(page 26).
if network traffic is a problem. Then click
Do not monitor
Next
.
Finish
and click the right arrow button
Next
.
Install Status Monitor 2
. Select and click
Yes
Stop monitoring now
.
Next
.
to restart
Finish
. This
25